高端uv能量计_贰高端uv能量计名片大小强烈推荐!

UV MINI紫外线能量计 UV-INT250

比较常见的名称：紫外线能量计，紫外线焦耳计，能量测试仪

• UV MINI迷你型能量计的突出优点：
  ■ 除了具备传统圆盘式紫外线能量计的基本功能外，其测量精度更高、稳定性更强。
  ■ UV MINI能量计是新款专利产品，其精巧、美观、轻便的外观设计，用户携带更为方便；
  ■ 由于采用高精密、微型进口元器件配置，仪器的整体外观尺寸非常小，对于所检测对象而言,尺寸要求更低，检测时灵活性更大，例如：大型的UV生产线、多面立体分布的UV光源系统、精密、小巧的低功率光源均适用；
  ■ 原产地:香港。
• 用途介绍：
  ■ 用于测量不同光源在一定时间内的照射能量值，也就通常所讲的光绩量；
  ■ 随着用户对紫外固化要求的不断提高，UV能量计已成为生产过程中极为重要的固化质量监测仪器，是能良好地控制和实现产品固化质量一致性的必备工具；
  ■ 测量的光谱范围为250-410nm(纳米)，最佳感应紫外线波长为365nm(纳米)；
• 使用方法：
  ■ 将能量计上方的开关调至打开位置即“ON”位置，此时，显示屏上将显示数字“0” mj/cm2（毫焦耳/平方厘米）。
  ■ 准备测量，将能量计的背面面向紫外线UV光源，以保证测量的有效性和准确性，感光窗有清楚的标识。
  ■  当仪器在光源照射一定时间之后，已记录所感测到的UV紫外光能量，此时，可以从仪器正面的显示屏上读取能量值，能量值的对应单位是：mj/cm2（毫焦耳/平方厘米）。

■ 每一次，在进行一次新的测量工作时，依据需要将仪器关闭，然后再次开启。显示屏上将重新调至“0” mj/cm2（毫焦耳/平方厘米）。接着可依照上述步骤继续操作。
■ 每一次使用时，请将仪器的开关调至打开状态即“ON”位置，液晶显示屏上显示的读数为“0”mj/cm2（毫焦耳/平方厘米）,如果不是想获取重复测试的累计能量值，请每一次测量前，将其读数归零。
■ 如果您的工艺特别需要，也可以反复地进行测量，每一次测量后的读数，不需要归零处理，那么，仪器上最后一次显示的读数将是多次反复测量的累计值。
当完成测量时，需将开关调至“OFF”位置，以便及时关闭仪器，正确的操作将有效保证仪器的电池使用寿命。

• 注意事项：
  ■ 请避免用力频繁摇晃仪器或摔坏仪器；
  ■  每一次测量完成，请及时将仪器关闭，并放回包装盒内保管；
  ■  测量时请避免将仪器正面的液晶显示屏直接置于强光或高热量环境中。
  ■  非专业人士，不宜自己打开仪器进行调校或破坏，这样将影响到仪器的检测效果和准确性
• 技术数据:
  光谱范围：     UV 250-410nm （纳米）
  光强范围：     不限
  量程范围：     0-999,999 mJ/cm2（毫焦耳/平方厘米）
  采用电源：     AAA电池
  电池功耗：     100μA
  电池寿命：     正常操作条件下使用一年
  外形尺寸：      93L* 63W*13Hmm(毫米)
  重    量：       150g(克)
  环境温度：     0至80℃(摄氏度)
  承受温度：     110℃(摄氏度)条件下持续照射不超过10s(秒)
  测量精度：     ±2%
  校验周期：     由于所有的电子元件，如：传感器，通常都会随使用时间的延长而老化，为准确地保证测量精度和效果，建议校验的周期为一年。
  保修期限：     由购买日起一年内保修，人为损坏或客观因素导致的损坏除外。

 UV MINI METER

n  Excellence

■ In addition to the basic function that a dish type integrator (UV Integrator 140) has, its precision is higher, and its stability is stronger.

■ It is the new patent product for RUNWING.It appear ingenious, beautiful and convenient, so it is more convenient to take.

■ Because of adopting high precision and miniature import, the whole external appearance size is very small and it can be applied for many UV system such as Large production line of UV system, multidimensional UV system and precision, nice and low-power UV system.

■ Origin: HONGKONG.

n   Introduction

■ It is used for measuring the energy of different light sources within a certain time, which isalso as usually called the light energy.

■ With the advancement of the curing requirements of customer, UV meter has more and more become the important quality monitor. It has also become the essential tool of controling and realizing curing quality consistency.

■ Spectral range is UV250-410 nm and the main length is 365nm.

n   Instruction for use

■ Switch on the UV-Integrator. The display on the LCD will show “0”mj/cm2.

■ Place the UV-Integrator with the front facing the conveyor belt. The sensor is on the back of the UV-Integrator. The back

     plate of the UV-Integrator serves as the heat shield.

■ After the UV-Integrator has passed through the conveyor, take the UV-integrator from the conveyor belt in order to read the measuring result. The measuring results are shown as: mJ/cm2.

■ Prior to a new measuring sequence, it is necessary to switch “off” and then “on” again.

 This will reset the display to “0”.

     Continue as described in Step 2.

■ After using the instrument, please put it into the packing box and prevent it broken.

■ You can measure it again and again if you need it .

n   Attention:

■ Please avoid shaking the UV-integrator or break it.

■ After using it every time, please close the instrument in time and put it into the packing box.

■ Do not put the LCD on the instrument out the high-light or high- energy area.

■ Don’t open the instrument to calibrate or destroy it if you are not professional. Otherwise, the measuring effect and precision of the instrument will be affected.

■ Technical Data:

Spectral range:  UV 250-410 nm

Measuring range: Unlimited

Display range: 0~ 999,999mJ/cm2

Power source: AAA Battery

Power consumption: 100μA

Batteryservice life: 1 year

Dimensions: 93L*63W*13H (mm)

Weight: Approx：150 kg

Temperature range: 0~ 80°Celcius

Maximal Temperature: While on the conveyor belt, The Integrator can withstand max. 110Celcius for up to 10 seconds

Measuring Precision:+2%

Calibration:In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery.

Warranty: 1 year from the date of purchase. But the battery, and other bad-easy parts and ruined instrument by man are not included